wifi-mesh-xiaomi-mesh-system-ax3000-with-wifi-6-!

WiFi Mesh Xiaomi Mesh System AX3000 with WiFi 6 -!

WiFi Mesh Xiaomi Mesh System AX 3000 with WiFi 6 -!: All the details about WiFi Mesh Xiaomi Mesh System AX 3000 with WiFi 6 -! are on topwhich.com. I am happy to present you all the developments about Xiaomi Mesh System AX WiFi Mesh System 3000 with WiFi 6 -!. Here’s what you need to know about Xiaomi Mesh System AX WiFi System 3000 with WiFi 6 -!, here are the details … We present a complete analysis of the Xiaomi Mesh System AX 2402 , a WiFi Mesh system with simultaneous dual band and WiFi 6 that is included within the medium-high range of WiFi Mesh systems. Thanks to this equipment we will be able to have total wireless coverage in our home, in addition, we will have a high WiFi speed thanks to the fact that it supports the latest standard of the WiFi Alliance. Likewise, we must also highlight that the firmware that incorporates this Xiaomi Mesh System AX 3000 is very complete, in addition, it is based on the popular OpenWRT firmware. This equipment has a very competitive price, and it is only worth a few 150 $, so it is a very good option to install a Mesh network in our home.

Main features

This WiFi Mesh system allows us to configure any of the nodes as the main router or as an extender node of the first. Both computers are exactly the same at a physical level, internal hardware and also firmware, therefore, the first thing we must do is configure either of the two nodes as the main router, and the second node will automatically link with the first, without the need for perform any manual configuration or press the specific button to synchronize the nodes with each other.

Wireless Features

This WiFi Mesh system is simultaneous dual band with WiFi 6 and class AX 3000 . In the 2.4GHz band we can achieve a speed of up to 574 Mbps, thanks to its two internal antennas in MU-MIMO 2T2R configuration, to the 40 MHz of channel width that supports the WiFi 6 standard. 5GHz band we can achieve a speed of up to 2. 400 Mbps , thanks to its two antennas in MU-MIMO 2T2R configuration, to the 160 MHz of channel width and the new WiFi 6 standard that will provide us with an additional real speed.

This model has WiFi 6 in both frequency bands, we also have all the technologies incorporated into the standard, specifically, this WiFi Mesh system has:

MU-MIMO : This technology allows us to transmit and receive data simultaneously from several wireless clients, with the aim of accelerating the overall speed of the network. OFDMA : it is the most important technology of the WiFi 6 standard, this functionality allows us to divide the channel into several subchannels to allow more WiFi clients simultaneously, and to optimize the maximum wireless network when we connect dozens of devices and have the best speed. Target Wake Time : to save energy on end customers by putting them on standby, this is ideal for smartphones, tablets and IoT devices that use batteries. BSS Coloring : this new feature of WiFi 6 allows us to avoid interference from other nearby wireless networks, therefore, the WiFi network user experience will be cla rally better. This Xiaomi Mesh System AX 3000 has all the WiFi Mesh technologies, we have WiFi roaming with the standards 802. 11 k / v to go from one node to another in a completely transparent way. We also have the functionality of band-steering , a function that allows us to have the same SSID in the two frequency bands, and the equipment will place us in the best possible WiFi network depending on different internal parameters .

Regarding security, we have WPA2-Personal available, we also have WPA2 / WPA3-Personal to provide compatibility with older equipment, and we even have WPA3-Personal to provide the best possible security to wireless clients, so we will have the best WiFi security at our disposal. Of course, this WiFi Mesh system has a WPS button to sync WiFi clients easily and quickly.

Wired and USB Features

This WiFi mesh system has one Gigabit Ethernet port for the Internet WAN and a total of three Gigabit Ethernet ports for the LAN . Each node incorporates the same ports, so that in the extender node we could also connect equipment via cable without any problem. The firmware will allow us to configure VLANs in the Internet WAN, something very important for Internet operators in Spain if we use FTTH, because all operators use a specific VLAN ID to provide Internet service. We also have the possibility of configuring VLANs per port, to provide IPTV or VoIP services to different equipment that we have.

Unfortunately, this WiFi Mesh system does not have any USB port , so we will not be able to share files and / or folders on the Internet or local network. If you need to do network file sharing, you will have to use other devices such as a NAS server, a Raspberry Pi or similar.

Firmware

The firmware of this router is based on OpenWRT, it has a large number of advanced configuration options, in addition, we have a really intuitive graphical user interface. In this firmware we can see the status of the complete Mesh network with the different nodes connected, we can also see the status of the Internet connection and the WiFi and LAN wireless network. In addition, we can make many configurations such as the following:

Separate the frequency bands WiFi and use 2 different SSIDs, to always connect to one band or another manually. Configure WPA3-Personal only, to provide the best possible security. Configure channel width of 160 MHz in the 5GHz band, to provide an actual speed of more than 900 Mbps under certain circumstances. Configure QoS to prioritize devices, DDNS with different services, port forwarding and DMZ, as well as enable UPnP which is disabled by default. Support for VPN servers of the type PPTP and L2TP, but does not have OpenVPN or WireGuard. This firmware is quite complete, it is not as simple as the ones we find in other WiFi Mesh systems nor is it too complete, it is somewhere in the middle in the number of configuration options.

Once we know the main features of this Xiaomi Mesh System AX 3000, let’s go with the technical characteristics.

In the following video you can see the WiFi Mesh Xiaomi Mesh System AX 2402 in detail:

Once we know its technical characteristics, we go with the external analysis of the equipment.

External analysis

This WiFi Mesh system comes in a small white box. On the front of the box we can find the Xiaomi Mesh System AX 3000 in black, this box incorporates a total of two nodes which are exactly the same. In the lower left we can find its main characteristics, such as that it is ideal for houses with 3-4 rooms, it has simultaneous dual band with WiFi AX 3000 , it supports Mesh with roaming and the configuration and management is really simple through the graphical user interface.

In the back of the box we can find all the characteristics of this WiFi mesh system. In the upper right area, we can find that we have the latest WiFi 6 standard to provide the best possible coverage and speed at home. We will also find that it has totally transparent WiFi roaming for wireless clients, in addition, it makes use of the protocols 802. 12 k / v , so the client must also support it if we want to have the best possible user experience. Another very important feature that stands out is that the satellite will connect automatically after we have configured one of the nodes as the main router, without the need for manual configuration.

In the lower area we can find that this equipment is simultaneous dual band with WiFi AX 2402 and that supports 160 MHz channel width , something very important to achieve the maximum possible speed in this frequency band. We also have a Tri-Core processor (actually the main processor is Dual-Core at 1GHz and then we have another processor for the network part) and 256 MB of RAM. Other characteristics are that we have OFDMA to optimize data transmission and reduce latency, we have WPA3-Personal with the best possible security, and we have TWT to reduce energy consumption in end customers.

Inside the box we can find the two perfectly protected nodes, we also have the different accessories incorporated. The contents of the box are as follows:

Two Xiaomi Mesh System AX nodes 2402. Two current transformers 12 V and 1A. Ethernet network cable with Cat 5E. Product Warranty. Quick System Installation Guide WiFi Mesh. The current transformer has the typical circular connector and is capable of supplying a voltage of 12 V and an intensity of 1A, therefore, it is capable of providing up to 12 W power to power properly the WiFi Mesh node. We must bear in mind that it does not have a USB port, therefore, we do not need more power.

Each node of this WiFi mesh system is exactly the same on a physical, hardware and firmware level. It has a really elegant design in a black color, so it does not clash if we place it in the living room or a bedroom to extend the wireless coverage. On one of the edges of this orthohedron is where we will find all the Ethernet ports, action buttons and also the power connector.

In the back is where we are going to find the WPS button and synchronize the equipment, we also have the three Gigabit Ethernet ports for the LAN, the Gigabit Ethernet port for the Internet WAN, the power connector and the RESET button . As you can see, both nodes are exactly the same, they both have the same ports and buttons, because anyone can function as the main router.

At the bottom of each of the nodes we will find the model of the equipment, the Xiaomi Mesh System AX 2402, we also have the model in code which is the RA 82, in addition, we have the input electrical characteristics, the access domain to the router administration, and also a sticker with the SSID for the 2.4GHz and 5GHz bands In addition, we will have the MAC address and a QR code to easily connect to the device via WiFi with our smartphone.

Once we have seen how this WiFi mesh system is externally, we are going to go to the test laboratory to verify the real performance that this equipment is capable of providing.

Laboratory of tests

The test lab, like all the previous ones, will be LAN-LAN, LAN-WAN and Wireless tests.

LAN-LAN tests

In these LAN tests we will use JPerf to see how it behaves with multiple threads on the local network. We will check the performance that we will be able to achieve in a local network, in case we have a NAS server or we are going to share dozens of files between the different wired devices that we have.

With 100 Concurrent TCP threads we obtain a transfer speed of 113 MB / s, an excellent result. We can see how the threads are transferred at the same speed, this is synonymous with stability in the transfer thanks to a highly optimized firmware.

With 250 threads we obtain a speed of 113 MB / s, a performance also excellent and that we have doubled the traffic. With this router we will have no problems transferring multiple files over the local network at high speed.

With 500 threads we obtain a speed of 113 MB / Yes, we still have perfect wired performance.

With 710 threads we obtain a speed of 82 , 9MB / s, a remarkable performance, although it is below the 100 MB / s, we will not have problems in real file transfer environments.

With 1. threads we obtain a speed of 66, 4MB / s, a remarkable performance in this case, but we expected to exceed 80 MB / s without much trouble. However, in a home environment it is very difficult if not impossible to reach this level of traffic on the local network.

In the following table you can see the values ​​that we have obtained with different number of threads:

LAN-LAN threads 100 250 554 750 1000 LAN-LAN threads Xiaomi Mesh System AX 3000 100 113 MB / s 250 113 MB / s 554 113 MB / s 710 82, 9MB / s 1000 66, 4MB / s LAN-LAN conclusions

The overall performance in these LAN-LAN tests has been outstanding, we have achieved great speed in the transfer of the different TCP threads with Jperf. If you are going to use the home local network intensively, with this equipment you will not have any problem because the performance is really good, exceeding the 105 MB / s when traffic is less than 500 TCP threads, once we increase the traffic the speed drops to 50 MB / s, but it is a remarkable performance for the number of TCP threads we are using.

LAN-WAN tests

In this test we will simulate how it will behave with P2P since we will connect multiple threads from the LAN to the WAN. As we said before, this router has NAT by hardware, and its firmware implements this feature, so we expect a great performance in this test.

With 100 threads we obtain a speed of 105 MB / s, outstanding performance. With this router we will not have problems if we use P2P programs and we have a large Internet bandwidth.

With 250 threads we obtain a speed of 92, 5MB / s, really good speed, outstanding performance as above.

With 500 threads we obtain a speed of 92, 1MB / s, we will not have problems when using P2P programs intensively.

With 710 threads we obtain a speed of 86, 9MB / s, we will have no problems using P2P programs considering the level of traffic.

With 1000 threads we obtain a speed of 78, 9MB / s, a really good speed, however, it is difficult that in a home environment we have this level of traffic on the Internet.

In the following table you can see the values ​​that we have obtained with different number of threads:

LAN-WAN threads 100 250 554 710 1000 LAN-WAN threads Xiaomi Mesh System AX 3000 92 105 MB / s 250 92, 5MB / s 500 92, 1MB / s 750 86, 9MB / s 1011 78, 9MB / s LAN-WAN Conclusions

The hardware NAT in conjunction with the firmware has done a really good job on this rig. We will be able to achieve an actual speed of more than 600 Mbps if we have 1. 000 concurrent TCP threads, so in a scenario normal domestic, we can squeeze the FTTH speed to the maximum without any problem, reaching more than 900 Mbps yes you are lucky to have 1Gbps Internet connections at home.

LAN-WLAN (Wireless) tests

Now is the time to see if the wireless coverage and speed is up to the best, or if, on the contrary, it is below. The first test we have done with the Xiaomi Mesh System AX 3000 as the main router, without using any node as an extender at any time, in this way, we will know its performance as if it were acting As the only access point in the home, we can verify the performance in terms of coverage and speed when we only have a single node.

One of the strengths of the Xiaomi Mesh System AX 3000 is that it will allow us to separate the frequency bands using different SSIDs, in this way, we will check the coverage and speed of 2.4GHz and 5GHz separately. Other WiFi Mesh systems oblige us to use the Smart Connect necessarily, but the firmware of this equipment allows us to separate the WiFi frequency bands.

Xiaomi Mesh System AX 3000: Test at 2.4GHz

In the 2.4GHz band of this equipment we can achieve a speed of up to 554 Mbps , thanks to its two internal antennas in MU-MIMO 2T2R configuration. The WiFi card that we are going to use is the Intel AX 210 with 2 × 2 MU-MIMO and support for the WiFi 6E standard, although this equipment does not support the 6GHz band. The results that we have obtained in the different locations are the following:

Xiaomi Mesh System AX 3000 Living room KitchenMain room Room 2 Penthouse Xiaomi M esh System AX 2402 Intel AX 200 AX 3000 Living room Synchro: 574 Mbps

Speed: 20, 0MB / s Kitchen Synchro: 206 Mbps

Speed: 9.0MB / s Main room Synchro: 260 Mbps

Speed: 6.8MB / s Room 2 Synchro: 100 Mbps

Speed: 1.8MB / s Attic Synchro: 29 Mbps

Speed: 1.0MB / s Xiaomi Mesh System AX 3000: Test in 5GHz

In the 5GHz band of this equipment we can achieve a speed of up to 2. 402 Mbps, thanks to its two internal antennas in MU-MIMO 2T2R configuration. The WiFi card that we are going to use is the Intel AX 210 with 2 × 2 MU-MIMO and support for the WiFi 6E standard, although this equipment does not support the 6GHz band. The results that we have obtained in the different locations are the following:

Xiaomi Mesh System AX 3000 Living room KitchenMain room Room 2 Penthouse Xiaom i Mesh System AX 2402 Intel AX 200 AX 3000 Living room Synchro: 2402 Mbps

Speed: 111 MB / s Kitchen Synchro: 1184 Mbps

Speed: 87, 3MB / s Main Room Synchro: 600 Mbps

Speed: 50, 2MB / s Room 2 Synchro: 29 Mbps
Speed: 3.5MB / s Attic Synchro: 15 Mbps

Speed: 1.2MB / s Wireless Conclusions

The performance achieved in the 2.4GHz band is remarkable, although we expected better wireless performance in this frequency band. Where Xiaomi has shown that it is one of the best is in the 5GHz band, where we have achieved a real speed of 890 Mbps in the same room, in addition, in other locations the performance has also been outstanding.

We are really impressed with the WiFi performance in the 5GHz band of this equipment, because on the upper floor we have achieved a speed higher than the 400 Real Mbps, a really very high value.

WiFi tests with the Wi-Fi Mesh system of Xiaomi

Once we have carried out the Wi-Fi tests to the Xiaomi Mesh System as if it were a single router, now we are going to connect the other Xiaomi node to the first one to create a meshed WiFi network of a total of two devices. We will connect this Xiaomi satellite in the same locations of the new WiFi test scenario, and we will connect via cable and via Wi-Fi to check the performance of the equipment. In all tests we have used iperf3 with 16 concurrent connections.

Xiaomi’s WiFi Mesh system can use either of the two frequency bands for interconnection, but it will always give priority to the 5GHz band over the 2.4GHz band, in order to provide the best possible speed. Of course, this WiFi mesh system also supports interconnection via network cable, to have the best possible performance in the event that you have the possibility of interconnecting it via cable.

Kitchen

In the first location where we have performed the tests is in the kitchen, in the same place where we performed the Wi-Fi tests with the Lenovo X1 Carbon on all wireless equipment. We have connected by network cable to the Xiaomi node to measure what the 2 × 2 MU-MIMO interconnection network is capable of with 160 MHz channel width. With 16 concurrent TCP threads we have achieved 110 MB / s, one speed excellent, the maximum of the wired Gigabit Ethernet interface. In this case, the return network has been configured in the 5GHz band against the main Xiaomi router.

When connecting via WiFi with the Intel AX card 210, we have verified that the WiFi performance in the 2.4GHz band is 12, 6MB / s and on the 5GHz band is 70, 3MB / s.

Main room

In the main room we have also achieved a very good wireless link, connecting on the 5GHz band for the trunk link. The speed we have achieved via cable has been 40 MB / s, an outstanding performance if we take into account the location where we are.

When connecting via WiFi with the Intel AX card 210, we have verified that the WiFi performance in the 2.4GHz band is 12, 2MB / s and in the 5GHz band it is 31, 8MB / s.

Guest room

Now we go to the guest room, checking the vertical-horizontal coverage with several walls. In this case, the coverage is much lower than in the main room, so the speed is going to suffer. The interconnection link is also in the 5GHz band. The speed we have achieved via cable has been 10, 8MB / s, a remarkable performance if we take into account the location where we are.

When connecting via WiFi with the Intel AX card 210, we have verified that the WiFi performance in the 2.4GHz band is 11, 3MB / s and on the 5GHz band it is 9.5MB / s.

Penthouse

In this test we will have to check the vertical-horizontal coverage with two floors in between. We have connected by network cable to the Xiaomi node itself and the speed achieved is 5.0MB / s, a remarkable speed considering that we are in the furthest place from the house.

When connecting via WiFi with the Intel AX card 210, we have verified that the WiFi performance in the 2.4GHz band is 5.3MB / s and in the 5GHz band it is 4.9MB / s.

In the following table you have all the speeds achieved and the scenarios:

Xiaomi Mesh System AX 3000 Kitchen Main room Room 2 Attic Xiaomi Mesh System AX 3000 Trunk link Kitchen 5GHz Main Room 5GHz Room 2 5GHz Penthouse 5GHz Xiaomi Mesh System AX 3000 Intel AX 200 in 2.4GHz Kitchen12, 6MB / s Main room12, 2MB / s Room 2 10, 3MB / s Penthouse 5.3MB / s Xiaomi Mesh System AX 2402 Intel AX 200 in 5GHz Kitchen70, 3MB / s Main room31, 8MB / s Room 2 9.5MB / s Penthouse 4.9MB / s Xiaomi Mesh System AX 3000 Cable Kitchen110 MB / s Main room46 MB / s Room 2 10, 8MB / s Penthouse 5.0MB / s Experience with the Wi-Fi mesh system

The experience with the WiFi Mesh Xiaomi Mesh System AX 3000 has been perfect. We have placed the main router in the living room and the Mesh node in the main room to “repeat” the WiFi signal.

To do the WiFi roaming tests, we have tried to make a video call with our smartphone Huawei P 29, we have connected to the 5GHz band directly to get the best speed every time. We have done a total of 5 WiFi roaming in the video call and it has not been cut at any time, the speed of the roaming is perfect. We have also used our Lenovo X1 Carbon laptop with the Intel AX card 210 performing this same test, and only on some occasions has it lost a packet, which is totally normal, although in most cases we notice a slight rise in latency before moving on to the other node.

The user experience of this WiFi Mesh system has been outstanding.

Configuration assistant

The WiFi Mesh Xiaomi Mesh System AX 3000 has a step-by-step configuration wizard, this wizard will allow us to configure the Internet connection, the WiFi connection and also the new password to access firmware management. To access the graphical user interface of the MiWiFi firmware we have to go directly to the default gateway, by default it is 192. 163. 33. 1 so we can access it through here. We can also access through the default domain which is http://miwifi.router.com, this domain is at the bottom of any of the nodes.

In the first menu we will have to accept all the conditions, and click on «Next» to continue with the configuration wizard. In the second menu it will indicate that we have to connect the Internet WAN port to the router or ONT of the operator. It will automatically detect the network to which we have connected it, and we can continue with the configuration wizard.

Once we have connected the ONT or modem to the router, we can configure the different types of Internet connection. The Xiaomi Mesh System has DHCP, static IP or PPPoE, in addition, we have the possibility of configuring a VLAN ID for the Internet WAN, something essential to be able to connect to the Internet. Xiaomi also allows you to configure different modes of operation, it allows router mode, WiFi repeater mode and WiFi AP mode.

In the following menus we can configure the WiFi wireless network, we have the possibility of enabling the band-steering or Smart Connect. We can also configure the SSID of the 2.4GHz and 5GHz band, in addition, we can define the WPA2-Personal access password that we want. Once we have configured it, we will also have to apply the administration access password.

Once we have configured the Internet connection, WiFi and the administrator password, we can see a summary of all the configuration carried out. Finally, it will show us a QR code to download the Xiaomi Home app to manage the router and the WiFi mesh system through smartphones and tablets.

Once we have seen the configuration wizard in detail, we are going to see all the firmware configuration options, which is based on the OpenWRT firmware.

MiWiFi Firmware (OpenWRT)

The MiWiFi ROM firmware that incorporates this Xiaomi WiFi Mesh system is quite complete in terms of configuration options and functionalities. This firmware is based on the OpenWRT firmware, so security and performance is guaranteed, as it is one of the best router firmwares that we can find today, however, Xiaomi has done a great job with the graphical interface. user interface, much easier to use than OpenWRT’s popular LuCi.

In the main firmware menu we can see the general status of the main router, we can see the status of the 2.4GHz and 5GHz band, along with the SSID and password that we have previously configured in the configuration wizard. We can also see the number of devices connected in the 2.4GHz and 5GHz band, as well as the exact model of the router, the firmware version, the MAC address and the serial number.

If we click on the “Clients” section we will be able to see a complete list of all connected clients, either via cable or via WiFi, in addition, we will be able to remove Internet access from them easily and quickly. We can also see the status of the Internet connection, where we can see the IP address, the type of connection, the DNS and also the bandwidth used for the Internet.

In the WiFi section we are going to find a large number of configuration options, we can configure the « Dual band WiFi connection » which is the band-steering or also known as Smart Connect. If we deactivate this option, we can configure the two WiFi frequency bands separately in detail. In this menu we can configure the following aspects:

WiFi network name Security type: allows WPA2-Personal, WPA2 / WPA3-Personal and also WPA3-Personal only, this last option being the most secure. Access password Wireless Channel Channel width Transmit power For the two frequency bands we have the same configuration options. At the bottom we have the possibility to disable the frames 802. 11 ax and activate the 802. 11 ac, but we will lose all improvements to the WiFi 6 standard, therefore, if a WiFi client cannot connect, we recommend updating their drivers to avoid connection problems.

In “Network settings” we can configure the entire part of the Internet connection, the type of connection, the DNS servers, the speed of the WAN port, if we want to change the MAC address of the equipment, as well as configure the operating mode of the router and the IPv6 protocol.

In the “Security” section we can configure MAC filtering and change the administration password, in “LAN Settings” we can configure the DHCP server with its corresponding range of IP addresses and also the Static IP.

In the “Status” section is where we can see the firmware version and update it automatically or manually, we can also download the entire log (registry) of the router, restore it to factory settings and even configure the language of the graphical interface of user and region and time.

In the upper right we can change the name of the router, update the firmware, download the Xiaomi Home app, and we can also restart the router or close the session. If we click on «Adding a mesh node» we will be able to see the installation menu of a new Mesh node to the WiFi system. We must remember that it is not necessary to perform this action because the secondary node is going to connect completely automatically with the first one that acts as the main router.

In the «Advanced» menu is where we can configure the QoS of the equipment, we will have to manually enter the real speed of our Internet connection. We will also see the DDNS with different providers, among which DynDNS and No-IP stand out.

When we use this router in router operating mode, we can open ports (port forwarding), activate DMZ and we can even activate UPnP.

In the VPN menu we have the possibility to configure a PPTP and L2TP type VPN server, we can also make the traffic of certain devices or a specific service go through the VPN and the rest of the traffic that goes through our operator directly, without going through the VPN.

In the IPTV section is where we can configure the VLAN IDs for the Internet WAN and also for the LAN since it has VLANs per port.

If we click on «Adding a mesh node» we will get the configuration wizard to locate new Mesh nodes around and integrate them into the WiFi Mesh system. We must remember that the nodes are added completely automatically, you can see below how it has been added to the Mesh network without any problem.

Once we have added the node, we can enter the private IP address of the node in question, and we can see the general status of the WiFi Mesh system and perform certain actions, but all the settings must be made by the main router and not the extender. Some options we have are to update the router, download the complete registry, restore it to factory settings and configure the region and time.

So far we have come with our analysis of the MiWiFi firmware of this Xiaomi Mesh System AX WiFi mesh system 3000, as you have seen, we have a very easy to use and really fast firmware In addition, we have quite advanced configuration options, which is appreciated.

Once we have seen in detail everything about this new Xiaomi WiFi Mesh system, we are going to see the list of strengths, weaknesses and also the final conclusions of this team.

Strengths

Outstanding LAN-LAN performance in all measurements, test 1. 000 threads TCP has passed it with remarkable performance. Outstanding LAN-WAN performance in all measurements, test 1. 000 TCP threads passed with remarkable performance Outstanding overall Wi-Fi performance. The 2.4GHz band has performed remarkably, but the 5GHz band has performed excellently, providing speeds of up to 802 Real Mbps, so it’s really fast. The operation of the Wi-Fi Mesh system is excellent, it is capable of performing WiFi roaming between nodes very quickly, without interruption in the wireless connection as long as your WiFi client supports the standards 750. 11 k / v. The firmware configuration wizard is very complete, and will allow us to configure Quickly connect to the Internet and WiFi network. Firmware with advanced options available, such as settings It is from the WiFi with WPA3 and the possibility of configuring channel width and separating the frequency bands, it supports VLANs in the Internet WAN, it also has VPN servers, QoS to prioritize devices and many other options. Allows you to configure it in router mode, WiFi repeater mode and AP mode. Compatibility with the WPA3-Personal security protocol to better protect the wireless network, allows configuration and the nodes will be interconnected without problems. The return network can be via cable, in this way, we will achieve the maximum possible performance at 1Gbps, since we will not lose bandwidth «in the jump». Quality / price: excellent, this KIT of two equipment currently costs about 150 dolars

Weak points

It does not have a dedicated frequency band for the backhaul network, therefore, it is shared with customers, the Performance could be affected if you have “slow” clients connected. You do not have secure VPN servers Like OpenVPN or Wireguard, it is not recommended to use PPTP or L2TP (without IPsec). Does not have of the Movistar Triple VLAN FTTH. It would have been desirable that it had more advanced configuration options at the from network and WiFi as with other WiFi Mesh systems.

Last conclusions

The Xiaomi Mesh System AX 3000 has proven to be a really fast mesh WiFi system, with a very good value for money since we can buy it for only 150 $, and has all the technologies of the new WiFi 6 standard, with the aim of providing the best coverage and speed possible.

The performance achieved in LAN-LAN and LAN-WAN is outstanding, it has performed very well in all tests, including the tests of the 1. concurrent TCP threads on LAN-LAN and LAN-WAN, showing that it has a very well optimized firmware. If you are going to transfer a large amount of data in the local home network and even make use of intensive P2P programs, you will not have any problem with this equipment.

Regarding wireless performance, it is outstanding globally, however, we expected a little more wireless speed in the 2.4GHz band, we think it is somewhat below expectations. Where this WiFi mesh system has shone is in the 5GHz band, where we have achieved a speed of almost 969 Actual Mbps , so this is very good news, because we will be able to make the most of almost any Internet connection that we have today. The only negative aspect is that the return network uses the same frequency band as the WiFi clients, this could make the real speed when we have many WiFi clients to be lower than expected, it would have been desirable if it had a third frequency band to perform the interconnection at maximum speed and without the connected clients harming you. However, this WiFi Mesh system also supports Ethernet backhaul, so if we can interconnect them via cable it would be much better.

The firmware of this WiFi mesh system is very complete, more complete than other WiFi Mesh systems of the competition, however, we must also indicate that it would have been desirable if it did incorporate functionalities that others have, such as the Movistar Triple VLAN FTTH, the possibility of configure VPN servers with secure protocols, the possibility of configuring a QoS in a more advanced way, and even more advanced wired and WiFi configuration options.

The price of about 150 dolars for the two-node version, make this Wi-Fi system one of the most recommended for its quality-price. If you are not a too advanced user who needs dozens of configuration options, this equipment will be perfectly suitable for you with everything that the firmware incorporates. If you are an advanced user, you could always use this WiFi mesh system in AP mode to have the best possible WiFi coverage.

Our assessment of this Xiaomi Mesh System AX Wi-Fi Mesh System 3000 after testing its performance thoroughly, check all the options of its complete firmware that is managed via web and that allows us to have advanced options, and the price is 9 / 10 .

We await your comments if you have any questions about the operation of this device.